Preface Thank you for purchasing the TK103 GPS vehicle tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.
1 Summary function Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS. 1.1 Positioning and Tracking: Through the on-line Positioning Platform or the cell phone to locates at times, and get the working status. You can choose the Positioning Platform by yourself. 1.2 Triggering Emergency Alarm: When there is a emergency happened on the vehicle, you can put on the button and the installed unit will send out alarm to the authorized numbers. 1.3 Remote controlling oil and circuit: you can control the oil and circuit via the unit by SMS in anywhere and anytime. 1.4 Remote Monitoring: In anywhere and anytime, call the phone number in the unit, when it connects, you can monitor the sound around 5 meter. 1.5 Movement Alert: Send SMS to the unit to start the movement alert function. When the vehicle is moving, the unit will send the movement alert to all authorized numbers. 1.6 Overspeed Alert: Send SMS to the unit to start the movement alert function. When the vehicle is overspeed, the unit will send the overspeed alert to all authorized numbers. 1.7 Geo-fence: Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to all authorized numbers when it breaches the district. 1.8 the unit: send SMS to resume the default of unit. 1.9 Auto Track: You can set up auto track by SMS or on-line positioning platform. 1.10 Mileage statistics; ACC checking; cutting off power and alarm. 1.11 Compatible with the original anti-theft alarm: It will send SMS alarm after the original anti-theft alarm warning. 1.12 Modify the IP and Port of Communication Protocol for different on-line positioning platform
Specs. 85mm x 63mm x 25mm(3.3”*2.5”*0.98”) 160g GSM/GPRS/GPS 850/1800/1900Mhz or 900/1800/1900Mhz or 850/900/1800/1900 SIRF3 chip Simcom300 or Simcom340 -159dBm 5m
Time To First Fix
Cold status 45s Warm status 35s Hot status 1s
Work voltage Battery Standby Storage Temp. Operation Temp. Humidity
10V—36V Chargeable changeable 3.7V 1500mAh Li-ion battery 48hours -40°C to +85°C -20°C to +55°C 5%--95% non-condensing
5 Usage 5.1 SIM card installation Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in Text format, can’t be identified for PDU format. 5.1.1 Put SIM card into card box. 5.1.2 Put the card box into host as picture.
5.2 GPS Vehicle Tracker Installation GPS/GSM/GPRS tracker should be installed by technical professional of local service centre. Without permission, the user can’t repair and move the tracker randomly. If users do, any unfortunate damage should be compensated by himself. 5
Install Wire Box
GPS Vehicle Tracker Installation
Installation steps (caution: the following installation should under no power, otherwise will be dangerous)
Wire for cutting off oil of the tracker Yellow wire connects the relay feet 86; 85 feet to 12 V DC anode, 87 feet and 30 feet in series in the supply oil circuits.
Wire for cutting off circuit of the tracker White wire connects relay feet 86; 85 feet to 12 V DC anode, 87 feet and 30 feet are in series in the supply power circuits.
Power supply line Emergency triggering alarm The blue wire connects the anode of the
The red wire connects 12V “ +”;Black wire connects to12V“-”
alarm button, and the black wire connects the cathode of the alarm button. 5.3 Startup 5.3.1
Installed the tracker in the car,then put the SIM card into the tracker host outdoors.
For first use, please initialize the unit and restore it to default setting.( please refer to 5.4 for instruction.)
5.3.3 In 10 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals, and the red indicator will keep flashing every 2 seconds when the GPS module is in standby mode. When the blue indicator is keep shine, the unit has been located. 5.3.4 When this unit receives GPS signals normally, you can use it and do all the following settings. 5.4 Initialization Send “begin+password” in SMS to the unit, it will reply “begin ok” and initialize all the settings. (Default password: 123456) 5.5 Change the password 5.5.1 Send SMS "password+old password+ space +new password"to change the password. Remark: Make sure the new password is in 6 digits, or else the tracker can not recognize the password. 7
5.5.2 you can Send "resumepassword" to the tracker, to restore the original setting in case of losing the new password. Remark: Please remember the new password, because most of the instruction need the password to set
5.6 Authorization There are only 5
numbers able to be authorized.
5.6.1 Call the tracker for 10 times, it will make the cell phone number as the authorized number automatically. 5.6.2 Send SMS "admin+password+space+cell phone number" to set up a authorized number. The other authorized numbers should be set by the first authorized number. If the number is successfully authorized, the unit will reply "add admin number ok!" in SMS. 5.6.3 Send SMS "noadmin+password+ space +authorized number" to delete the authorized number. If the number is successfully authorized, the unit will reply "cancel admin number ok!" in SMS.
5.6.4 For roaming purpose, you have to add your country code ahead of the cell phone number, for example, please send "admin123456 008613311113333" to tracker to set 13311113333 as an authorized number.
5.7 Real-time polling 5.7.1 If there is no authorized number, when any number dials up the unit, it will report a Geo-info; If there is already an authorized number, then it will not respond when an unauthorized number calls it up. 5.7.2 When an authorized number dials up the unit, it will hang up and report a real-time Geo-info as below:
5.8 Auto Track Report a Geo-info at 30s intervals to the authorized numbers for 15 times: 5.8.1 Set up: Send SMS "at30sum15 " to the unit, it will report the Geo-info at 30s intervals for 15 times. The setting must be maximum 999999 in value. 5.8.2 Send SMS "at30sum0" to the unit, it will reply SMS heaps of times.
5.8.3 Cancel: Send noat+password to delete the “auto track”.
5.9 Remote control oil and circuit 5.9.1 Control oil Send SMS "stopoil+password" to control oil. For example send SMS:stopoil123456 To supply the oil again, send SMS "supplyoil+password" to the unit.
5.9.2 Control circuit Send SMS "stopelec+password" to control circuit. For example send SMS: stopelec123456 To supply the circuit again, send SMS "supplyelec+password" to the unit. If there is no authorized number, all number can control. If there is already an authorized number, only the authorized number can control.
5.10 Modes switch between "tracker" and "monitor" 5.10.1 The default mode is "tracker". 5.10.2 Send SMS "monitor+password" to the unit, and it will reply “monitor ok!” and switch to “monitor”mode. 5.10.3 Send SMS "tracker+password" to the unit, it will reply “tracker ok!” and restore to “track” mode.
5.11 Geo-fence Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to the authorized numbers when it breaches the district. 5.11.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send SMS "stockade+password+ space +latitude,longitude;latitude,longitude" to unit to set the restricted district. In case of breach, it will send SMS "stockade!+geo-info" to the authorized numbers. Remark : The first latitude&longitude is coordinate of the top left corner of the Geo-fence, while the second latitude &longitude is the coordinate of the bottom right corner. It will alarm one time in each setting. 5.11.2 Cancel: Send SMS "nostockade+password" to deactivate this function. This function will be out of effect after the unit moves outside the district. 5.12 Movement alert 5.12.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send SMS "move+password" to the unit, then the unit will reply “move ok!”. In case of such a movement, it will send SMS “Move” along with a Geo-info to the authorized numbers. It will alarm one time in each setting. 5.12.2 Cancel: Send SMS "nomove+password" to deactivate the movement alert. Remark: This function will be out of effect after the unit moves outside the district.
5.13 Overspeed alert: 5.13.1 Set up: Send SMS "speed+password+ space +080" to the unit (suppose the speed is 80km/h), and it will reply "speed ok!". When the target moves exceeding 80 km/h, the unit will send SMS 9
"speed+080!+Geo-info" to the authorized numbers. It will alarm one time in each setting. 5.13.2 Cancel: Send SMS "nospeed+password" to deactivate the overspeed alert
5.14 Restart the tracker. Send SMS "reboot+password" to the tracker. For example"reboot123456".The tracker will be restarted.
5.15 SOS button Press the SOS for 3 second, it will send "help me ! " to all the authorized numbers every 3 minutes. It will stop sending such a SMS when any authorized number reply SMS "help me !" to the tracker.
5.16 Cut power alert If cut power,the unit will send SMS alert. SMS format: " Cut power Alert+Geo-info".
5.17 set number in a online positioning platform Add the number on the online positioning platform for tracking. Adding to the special platform, send SMS "number+tracker number" to the tracker. for example “number13500001111”. need the platform have the function. 5.18 Modes switch between “telephone” and “web” 5.18.1 For sending GPS data to IP address: Set up: Send SMS "web + password" to device. if set successfully, the device will reply SMS "set web ok". After this, you can call the tracker. The tracker will hang up the phone and report the GPS data to IP address.
For sending GPS data to telephone:
Set up: Send SMS "telephone + password" to device. if set successfully, the device will reply "set telephone ok". And then, the device will send GPS data to your telephone by SMS. Remark:The default is sending the GPS data to the telephone.
5.19 GPRS setting In order to use GPRS function, the user needs to set IP, Port and APN ( access point name ) by sending SMS commands. 5.19.1 Set an IP address and port: 10
The IP address and port of Communication Protocol in the tracker can be modified and transferred data to other platform. Send SMS "ip +ip address+port +port number" to the unit. If the tracker’s IP address and port number should be modified to 22.214.171.124and 8500, send SMS "ip126.96.36.199port8500"to the tracker. 5.19.2 Set APN/APN user and password 19.2.1 In order to send GPS data to IP address, you still must set mobile network APN (.Access Point Name) If you don’t know the APN, you can consult local network service supplier. The format of set APN is "apn + password + space + apn name ". For example the Chinese apn is cmnet so you send SMS "apn123456 cmnet" to the device. The device will reply SMS "Set APN ok. " . 19.2.2 Send message"user+password+ space +user name+ space +user password"to set the APN user
5.20 Set Time In order to make the time as the same with the user country,please send SMS command "zone+123456 + space +time zone". For example,if user country time is GMT+8,then send"zone123456 8"to the device. If user country time is GMT-6,then send"zone123456 -6"to device. The device will reply SMS"set time zone ok".
6 Cautions 6.1 Make sure to read this manual carefully before using this product. 6.2 Please insert the SIM card before installing, and make sure the SIM card has no password, otherwise the tracker will not work normally. 6.3 The tracker’s work voltage is 10V-36V. Please use the tracker in the scope of work voltage. 6.4 Please make sure that all the cables of the tracker has been connected rightly, and then connect the tracker to host power. 6.5 The tracker works in wireless communications, to avoid electromagnetic interference or incompatible configuration, please stop using your tracker in the noticed place. 6.6 Keep the unit dries. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry. 6.7 Clear the unit with a piece of dry cloth. Don’t clean in chemicals or detergent.
7. Faults & The solutions Faults Startup Fail Hang up Fail
Solution Check the battery and see if it is fully charged or correctly installed. In existence of an authorized number, an unauthorized number dials up the unit. Please initialize the unit and re-set up the authorized numbers. Check if the authorized number is setup or in the coverage of signals.
Location report in
Don’t use it in the place beyond reach of signals. Place the unit outdoors, especially when starting it up.
digits of zeros.
8 Command N o 1
Change password ok
resume password,passwor d is 123456
Add in number
no admin ok
auto track set ok
auto track set ok
Cancel auto track
cancel auto track ok
stop oil ok
supply oil ok
stop electricity ok
supply electricity ok
no stockade ok
Cancel movement alert
Cancel overspeed alert
cancel speed ok
Restart the tracker
cancel move ok
5.14 help me!
Add number into platform
set number ok
set web ok
set telephone ok
set ip address and port ok
set APN ok
user123456 cmnet cmnet
Set apn user name and password ok
zone123456 TIME ZONE
Set time zone ok
Set APN password Set time
Remark: 1.123456 is the deivce password, 1351111333 is the authorized number,, 13500001111 is the the device terminal track number 2.The first using ,please put the device to the outdoor which have the power GPS signal ,then begin to track after two minitues. 3.The English capital letter and lower-case represent the command , English capital letter is the setting content ,please using lower –case to edit all commands by telephone.
TK103 GPS Vehicle tracker user manual
GPS VEHICLE TRACKER USER MANUAL
Preface Thank you for purchasing the TK103 GPS vehicle tracker. This manual shows how to operate the device smoothly ...
4.4 Install the device. You need to choose somewhere that it won't be found, because the whole point of fitting covert GPS vehicle tracker is the secrecy element. 1. Your device has built-in GSM antenna and GPS antenna. During installation, please ma
GT001 user manual. Updated2017-02-10 15:28:23. Click to download. 分享到：. PreviousGT003 user manual; NextNo Information. 返回顶部. HLXT 2016-2026 ICP888888. Laowei Industrial Zone,Longhua,Shenzhen518109. Tel：0755-28146497 QQ:372756914. ;. 0755-28146497. 周一
GPS Tracker Users Manual details for FCC ID 2AH6ZEV-07S made by SHENZHEN EVIEW TECHNOLOGY CO.LTD. Document Includes User Manual GPS & GSM VEHICLE TRACKING SYSTEM.
Apr 12, 2016 - GPS Vehicle tracker. (GPS+GSM+SMS/GPRS). GT06 User Manual. (Version 3.2). Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using th
GPS Vehicle tracker. (GPS+GSM+SMS/GPRS). User Manual. (Version 2.2). Please read this manual carefully before attempting installation and online activation. Pictures are for indication and illustration purposes only.
GPS Vehicle tracker. GT03A. User manual. (Version V1.3). Please read this manual carefully before attempting installation and online activation. Pictures are for indication and illustration purposes only.
1. GSM/GPRS/GPS Vehicle Tracker. TK103A/B User Manual. Preface. Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note t
GPS Vehicle Tracker User Manual details for FCC ID X3U-TK110 made by TOPTEN ELECTRONICS TECHNOLOGY LIMITED. Document Includes User Manual User Manual.
1. GSM/GPRS/GPS Vehicle Tracker. TK103A/TK103B User Manual. Preface. Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please n
GSM/GPRS/GPS PORTABLE. VEHICLE TRACKER. User manual. Preface. Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note tha
GSM/GPRS/GPS PORTABLE. VEHICLE TRACKER. User Manual TK-104. Preface. Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please n
GPS Vehicle Tracker. (GPS+GSM+GPRS). User Manual For GT02. (Version 1.2). Please read this manual carefully before attempting installation and online. Activation. Pictures are for indication and illustration purposes only. UVI Group Corporation. 11C,
Avula Nze. ... How to setup GPS Vehicle tracker device for motorcycles and cars. ... I have setup ...
1. TK303 GSM/GPRS/GPS. Tracker User Manual. Preface. Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. ...... GPS start time. Cold status 45s. Warm status 35s. Hot status 1s. Car power supply. 1
accurate vehicle tracker manual gps tracker ST-901,US $ 19 - 25 / Piece, Gps Tracker, Automotive, no Screen.Source from Shenzhen Auto Leaders Technology Co., Ltd. on Alibaba.com.
Hot Sale Mini A8 LBS Tracker Locator Global Real Time Car Kids Pet GSM / GPRS / LBS Tracking Power adapter NO GPS Tracker. Description: This product is used the Taiwan's newest technology, which has the advantages of small and exquisite volume, clear
User Manual VJOY is Chinese leading manufacture in car safety & security with over 10 years of development and production experience include GPS tracker, vehicle tracking solution, personal position locator and spy GPS tracking device.
The most advanced technology of GPS and AGPS dual positioning. The waterproof level achieve IPX - 6. 2. Applications. ○ Vehicle rental / Fleet management etc. ○ Outdoor sports. ○ Protect children / elder/ Asset/ pet and so on. ○ Provide peace-of-mind
CorvusGPS.com's online GPS Fleet Tracking software is web based, you don't need to install anything: a web browser and an internet connection is all you need. All of your data is stored in a secure cloud. Our mapping app can be installed on tablets a
GT02 Multi-function Version – Real-time Tracking, Vibration Alarms, Voice Monitoring, Cut-off Engine or Oil pump, SOS Emergency Alarms, External Power Cut Alarm Movement Alarm;. Package & Accessories. H02: 2 Pin Power Cord *1; Battery*1 (Optional);Us